The Attitudinal Changes Exhibited by Students Exposed to Teaching Science by Integration of Indigenous Industrial Activities in the Teaching and Learning of Selected Concepts of Matter

The main aim for this study is to find out the attitudinal changes exhibited by students exposed to teaching science by integration of indigenous industrial activities in the teaching and learning of selected concepts of matter in the Greater Accra Region of Ghana. The study concentrated on the second year Junior High School students of Kaneshie Kingsway ‘2’ JHS of Kaneshie Kingsway Cluster of Schools in the Okaikoi South Metro of the Greater Accra Region of Ghana. The study employed posttest-only non-equivalent control group design of the quasi-experimental research design. The researcher employed the purposive sampling technique for this study, making up of 43 males and 47 females. The instruments used for collecting data for this research were test, questionnaire and semi-structured interview schedules.The study employed both quantitative and qualitative methods of data analysis mean, standard deviation, Pearson’s correlation (r) and description or explanation of terms. The study revealed that students exhibited positive attitude when exposed to teaching science by integration of indigenous industrial activities in the teaching and learning of selected concepts of matter.


Introduction
Science embraces every attempt of humans to explore, interpret and manage the natural world. Science is also primarily concerned with the intellectualisation of facts and values in an unbiased manner (Samuel, 1996). In addition, it is dynamic and essentially concerned with the search and explanation of both regularities and irregularities in nature. Furthermore, it involves the quest for actions and reactions, and causes and effects in the environment. The purpose of science is to transform the environment towards improving the general quality of life, thus making the world a better place in which to live.
Every traditional society of the world possesses a form of science or technology which is employed in indigenous practices geared towards the satisfaction of basic needs. These informal practices may be useful even in the face of modern science and technological advancements (Ogunniyi, 1988;Samuel, 1996). Instead of rendering them obsolete in these societies, they can be refined and integrated in the knowledge and techniques of modern science. Because they constitute direct experiences with the immediate environment and with the natural world, they may be very useful to teachers and learners in enriching classroom science experiences and thereby facilitating teaching and learning.
Formal and informal sciences interact with one another. In Nigeria, both are practised in different contexts and their linkage is advocated (Mejeha, 1992;Animola, 1992;Seweje, 2000). For this tobecome a reality in Nigerian, the National Policy on Education (NPE) of 1977 categorically introduced indigenous knowledge and technologies into the curriculum from such diverse fields as traditional arts and crafts, traditional cosmetics, traditional food systems and medicine, knowledge of the environment, and African civilization (Federal Republic of Nigeria, 2004).Although this perspective may seem retrogressive considering the present pace of global scientific and technological advancement, the motive is crucial in orientating learners to perceive science as action taking place daily in the environment.
Children acquire indigenous concepts of the natural world from the communities in which they live. They also develop their own concepts and explanations about natural phenomena from the environment. Children's conceptions and views of the natural world are products of socio-cultural influences as well as individual construction . Science education, which is seen to directly deal with the natural world, could play a major role in shaping children's conceptions and world views. However, in the science classroom, children's indigenous conceptions and world views may sometimes be incompatible with scientific knowledge and the scientific world view. Contemporary view holds that an African is operating in two worlds when it comes to the learning and practising of Western Science and Technology. Based on this view, it is apparently obvious that the curriculum materials drawn out to teach science and other science related subjects to African children must have the recognition for these "two worlds".
A great concern has been raised about the fact that the teaching and learning of science in African schools has been divorced from the variety of science and technology concepts in indigenous, informal and formal industrial activities within learners' environment, of which they may have prior knowledge. Learning is a process of building on existing knowledge base. The activation of learners' prior knowledge and experiences refers to cueing the memory of concepts or ideas and situations and bringing these to the forefront to be utilised by learners (SACOST, 2008). For any effective teaching and learning to occur, the knowledge and personal experiences of learners need to be first activated.
There are a lot of indigenous industrial activities that the learner may be aware of in his or her community. Some of these are "pito and burukutu" brewing, soap making, batik making, tie and dye making, blacksmithing, shea butter or oil extraction from nuts and seeds, herbal extraction, kenkey making, beads making and leather making, to mention a few. Students see these activities or practices carried out, but never know how the processes in there are related to the science studied at school.Realising the importance of indigenous technologies in science teaching, Anamuah-Mensah (1987) advocates the integration of indigenous technologies in the teaching of science. As a consequence, a Centre for School and Community Science and Technology (SACOST) was established by African Forum for Children's Literacy in Science and Technology (AFCLIST) and nested at University of Education, Winneba Since 2000. The focus of the Centre is to promote the use of indigenous technologies in the teaching and learning of science in Ghanaian schools. Many scholars like Anamuah-Mensah (1987), George (1988), Aikenhead (1997a) and Anthony-Krueger (2010) have argued in favour of the efficacy of the use of the indigenous technologies in science teaching and learning process to improve science learning outcomes. Anthony-Krueger (2010) showed that at higher levels of Bloom's Taxonomy in the Cognitive domain (comprehension, application, analysis and synthesis) students in selected Junior High Schools in the Upper West Region of Ghana performed better in science.

Statement of the Problem
One of the ever surfacing observations made by many science teachers is JHS students' inability to perform creditably in application science questions. This does not only reflect in their class exercises and terminal examinations, but also in their performance at the Basic Education Certificate Examination (BECE). For instance the Chief Examiner's Report of BECE (2001) indicates this fact by testifying that candidates of general science were lacking the ability to apply scientific concepts and principles in solving problems.
Moreover, observations have shown that African school graduates have not been applying the knowledge they acquire from the science classroom in daily practical activities. The above observation is often seen as an attitudinal lapse, but this could be related to the indigenous conception of the African which some authors describe as being very peculiar to their own ways of life (Anamuah-Mensah, 1987). Perhaps these conceptual peculiarities are the only unique thing of the African which may account for the observed attitudinal lapse.
It is a fact that prior conceptions of learners influence teaching and learning. Studies have shown that taking accounts of pupil's prior knowledge during teaching is one of the strategies which enhance learners' ability to adapt learning to practical settings (Rivet &Krajcik, 2002). In the African context these prior conceptions are often related to the indigenous ideas/ conceptions. However, most African science curricula systematically ignore the spectacular achievements of the African people in science (Hodson, 1993). Therefore, science taught in African schools is completely disjoined from indigenous concepts and hence teachers scarcely make any effort to alter pupils' prior conceptions to make room for functional adaptation. When children's prior conceptions are known and respected, plausible alternatives could be offered to them to make a negotiation. Hence the knowledge of children's prior conceptions from their indigenous settings can play an important role in learning outcomes. It is equally important to note that there are many indigenous conceptions that conflict with the Western Science that is taught in African schools. According to Fafunwa (1972), andOsborne andWittrock (1985) the conflict between these two bodies of knowledge is most likely to: i. Make learning of science more difficult. ii.
Prevent learners from practising science concepts learnt. iii.
Affect teachers' way of teaching science concepts. If the above are true, then this might account for learners' tendency to label science as being masculine and difficult. This psychological perception alone has a serious repercussion in learners' attitude towards science learning and application. In fact, since the African teachers themselves were taught without the appropriate alteration of their indigenous conceptions or ideas, they themselves will have some level of imbalance in their convictions with regard to scientific conceptions. This will invariably affect the way they lay emphasis on the application of the science concepts they teach. The most pressing observation in Ghana in particular is the existing gap between knowledge and practice/application.The activation and use of prior knowledge is therefore the first step towards any effective teachinglearning process. A study to investigate effects of teaching selected concepts on matter in integrated science using integration of Indigenous Industrial Activities at the JHS level in Ghana is therefore necessary.

Purpose of the Study
This study was designed to find out the attitude exhibited by students expose tointegrating indigenousindustrial activities in the teaching and learning of matter at the JHS level.

Research Questions
1. What attitudinal changes does students exposed to teaching science by integration of indigenous industrial activities exhibit? 2. What are the differences in the attitudes of the male and female students who were exposed to teaching science by integration of indigenous industrial activities? Ho 1: There is no significant difference between students' attitudes towards integrated science and their achievement in integrated science? Ho 2: There is no significant relationship between students' attitudes towards integrated science and their achievement in integrated science?

METHODOLOGY
This study employed posttest-only non-equivalent control group design of the quasi-experimental research design. This research design was used because the study investigated the effect of two teaching approaches: integrating indigenous industrial activities in science teaching and the traditional approach to science teaching on experimental and control groups, which have not been equated by randomization.
In employing this design, two intact classes (Form 2 A and 2 B ) were used with one, as an experimental group and the other, control group. Both groups were assessed with same baseline test items in order to determine their academic standard. Form 2 A class obtained the lower mean mark of 6.45 and was made the experimental group while 2 B class which had the higher mean mark of 6.81, was designated the control group. The two classes were given different treatments after which they were assessed with post-test items to ascertain the effect of the treatments. The design is further explained in the model below.
Control group The abbreviations and symbols used in the model have the following meanings: O1 means assessment 1 (baseline test) O2 means assessment 2 (post-test) The symbol 'X' implies treatment of integrating indigenous industrial activities in the teaching/learning of matter (experimental group).
The symbol '-' implies using the traditional science instructions in the teaching/learning of matter (control group). The dotted line indicates that there is no random assignment of subjects to the groups.

Population
The study (accessible) population was all second year Junior High School students of Kaneshie Kingsway '2' JHS of Kaneshie Kingsway Cluster of Schools in the Okaikoi South Metro of the Greater Accra Region of Ghana.

Sample and Sampling Procedure
The researcher employed purposive sampling procedure in selecting the school for the study. The purposive sampling technique, also called judgment sampling, is the deliberate choice of subjects due to the qualities they possess. It is a non-random technique that the researcher decides what needs to be known and sets out to find subjects who can and are willing to provide the information by virtue of knowledge or experience (Bernard, 2002;Lewis & Sheppard, 2006). However, purposive sampling can be applied to research in a number of ways, such as in preliminary studies where the researcher is still testing the feasibility of a proposed study (Poggie, 1972), sampling informants with a specific type of knowledge or skill (Prance, 2004;Vargas & van Andel, 2005;Li, Long, Liu, Lee, Guo, Li & Liu, 2006), comparisons of cultural practices (Neupane, Shaarma&Thapa, 2002) etc. Only Kaneshie Kingsway '2' Junior High School was sampled for the study. The sample for the study was two intact classes of second year (2 A and 2 B ) Junior High School students in the selected school. This was made of 43 males and 47 females. The use of second year Junior High School students was dictated by two factors. Firstly, second year students were expected to have prior knowledge on the topic 'matter' from first year. Secondly, concepts on the topic 'matter' featured prominently in the second year integrated science teaching syllabus (2007) and students were studying it at the time of the research.
Journal of Education and Practice www.iiste.org ISSN 2222-1735 (Paper) ISSN 2222-288X (Online) Vol.11, No.6, 2020 Instrumentation The instruments used for the collection of data in this study were test, questionnaire and semi-structured interview schedules.

Test
Two test instruments were used for the collection of data for the study. These were the baseline test and post-test. Each test instrument question was of twenty items, comprising:  ten (10) multiple-choice items;  five (5) true/false items and  five (5) short-answer/completion items.

Baseline test
A baseline test (Appendix A) was basically used to classify the two intact classes into control and experimental groups.
It was administered to all participants in their respective classrooms by the researcher and the questions were based on what they were taught on the topic matter in the previous year (form one). The class that obtained the lower mean mark in the baseline test was chosen as the experimental group and that with the higher mean mark as the control group. This was to prevent the situation where any observed positive effect might be as a result of the pre-existing academic difference between the classes.

Post-test
Lessons were prepared linking indigenous industrial activities to scientific concepts by the researcher. The experimental group was then taught some selected concepts using these lessons for a period of six weeks. The selected concepts included states of matter, properties of the states of matter, change of states of matter, mixtures, separation of mixtures, metals and non-metals. The indigenous industrial activities that were integrated into the teaching of these concepts were kenkey making, gari production, blacksmithing, leather making and beads making. The control group was however, taught the same topics using only the traditional approach to teaching and learning of integrated science for the same period by the researcher. Subjects in both experimental and control groups were then tested with a Post-test Instrument (Appendix B) -Students' Achievement in Integrated Science Test (SAIST). The outcomes of the test (SAIST) were used to answer Research Questions 1 and 2.

Questionnaire
The students' questionnaire was made up of ten (10) items (Appendix C) and, were close-ended and on a five-point Likert type scale. The students' questionnaire was used to find out how the integration of indigenous industrial activities in the teaching and learning of selected concepts on matter had influenced the attitude of JHS students towards the learning of integrated science.

Interview Schedule
Semi-structured interview (Appendix D) was employed as one of the main tools in this research to collect more information from the pupils. This is because, where a quantitative study has been carried out, qualitative data can be used to validate particular measures or to clarify and illustrate the meaning of the findings, and to see whether their experiences concur with the ratings on the measure (King, 1994).
The researcher interviewed twenty (20) students from the experimental group. These students were chosen at random using simple random technique and gender balance was taken into account. In all ten males and ten females were sampled for the interview. The students' interview was made up of ten (10) items.The interview formed the secondary source of data to supplement the questionnaire, which was supposed to be the primary source of data. It was used to determine whether the respondents' (students) expressed views were consistent with their questionnaire responses, and finally it assisted in interpreting and explaining the findings.

Validity and Reliability of the Instrument
Students test,questionnaire and interview were developed in consultation with peers and supervisors providing expert advice to enhance content validity of the instrument. In order to ensure that the research instruments produce scores that are stable and consistent and their test items and questionnaire items are devoid of any ambiguities (Creswell, 2008), the test items were pilot-tested at the Kaneshie Kingsway '1' JHS at Kaneshie in the Greater Accra Region which is outside the accessible population. The above school was used because it has some attributes similar to the accessible population of the study. The test items was personally administered to twenty (20) students in the pilot school and the result was analysed afterwards to determine the validity of the instrument and helped revise items that needed correction. But questionnaire and semi structured interview items were examined by experts in science education who had undertaken research involving classroom studies and indigenous industrial activities and some colleagues for peer review. Their responses varied in length and detail, but in general, were of a positive and supportive nature. The revised questionnaire and semi-structured interview items were then used to collect data on attitudinal changes students' exposed to teaching science by integration of indigenous industrial activities exhibit.
Journal of Education and Practice www.iiste.org ISSN 2222-1735 (Paper) ISSN 2222-288X (Online) Vol.11, No.6, 2020 On the days that data were collected, the Subjects were made to understand that the questionnaire, baseline test, post-test and interview were in no way a test and that what was required of them was to answer in a sincere manner. The researcher took the respondents through the twenty items on the baseline test and post-test, and ten item questionnaire explaining and citing examples to bring home meaning to statements which seemed difficult to be understood by the respondents.
Cronbach alpha co-efficient was used to determine the reliability of the instrument after the pilot-testing. The cronbach alpha co-efficient of the baseline test was 0.838, that of the post-test was also 0.771, which indicates that the tests were reliable, (Appendix E). A test with a Cronbach alpha coefficient of 0.7 indicates that the test is 70% reliable in practice and any reliability co-efficient equal or greater than 0.7 is acceptable. According to Borg, Gall and Gall (1993) coefficient of reliability values above 0.75 are considered reliable.

Results /Discussion
Analysis with respect to research question one RQ 1: What attitudinal changes does students exposed to teaching science by integration of indigenous industrial activities exhibit?  Table 1 presents the mean and the standard deviation of experimental group students' responses to attitudinal questions. In general, a mean score which is greater than 3 was deemed as a positive attitude, and a mean score less than 3 was considered as a negative attitude. Since the students responded to a five point likert scale items with 3 as the undecided point. Out of a total score of 50 which is the most positive attitude score and 10 being the least negative attitude score, the experimental group students scored 45.39. Again, from Table 1 all the 10 experimental group students' scores had a mean score of 4 or higher. This indicates experimental group students' high positive attitude towards integrated science after the exposure to the integration of indigenous industrial activities in the teaching and learning of selected concepts on matter. In other words none of the students in the experimental group demonstrate a negative attitude towards science.
Analysis and testing of hypotheses with respect to research question two RQ 2: What gender attitudinal changes does students exposed to teaching science by integration of indigenous industrial activities exhibit? Ho 1: There is no significant gender difference in the attitudes of the male and female students who were exposed to teaching science by integration of indigenous industrial activities? Ho 2: There is no significant relationship between students' attitudes towards integrated science and their achievement in integrated science?
The result from Table 2, presents the mean and the standard deviation of male and female experimental group students' responses to attitudinal scale questions. Out of the total score of 50 which is the most positive attitude score, and 10 being the least positive (or most negative) attitude score, the male students scored 45.31. A study of Table 2 showed that all the male students' scores had a mean score higher than 4 which indicated a positive attitude towards integrated science. This implied that all the male students in the experimental group showed positive attitudes towards science. Also, out of a total score of 50 which is the most positive attitude score and 10 being the least positive, the female students scored 45.46. This indicated that the female students also had a positive attitude towards integrated science. The outcomes from Table 2 again showed that 9 out of 10 of the items had a mean score higher than 4. The remaining one item score of the female students had a mean of 3.88, indicating trend of positive attitudes towards integrated science.
Journal of Education and Practice www.iiste.org ISSN 2222-1735 (Paper) ISSN 2222-288X (Online) Vol.11, No.6, 2020 Table 3 reveals a, between experimental group students' attitudes toward integrated science and their achievement in integrated science of -0.144. According to Black (1999), -0.3 < |r| < 0.3 signifies a weak (little) or no correlation. However, this correlation was not statistically significant (p=0.363). There is therefore no correlation between experimental group students' attitudes to integrated science and their achievement in integrated science.

Experimental group students' attitudes towards integrated science
In general both set of students (male and female) in the experimental group showed positive attitudes towards integrated science (Table 1). The male students had a mean score above 4 in their attitudes towards integrated science (Table 2). Also, all of them found the new method or approach interesting and appropriate with mean score of 4.82 (Table 2). In addition, all of the female students showed positive attitudes towards integrated science (had a mean score above 3.5). Besides, all of them also found the new method or approach interesting and appropriate with a mean score of 4.79 (Table  2). However, one item in the female students' scores showed a weak positive attitude with mean of 3.88 (Table 2). According to Gal and Ginsburg, (1994) poor or negative attitude towards a subject can result in poor learning and achievement in the subject. This implies that, attitudes are important considerations in learning and achievement in science.

Relationship between students' attitudes and achievement
The results as well revealed that the relationship between students' attitudes to integrated science and their achievement in integrated science was not statistically significant (Table 3). This means that, the achievement of the experimental group students in the post-test did not correlate with their response to the attitudinal scale questions.This therefore suggests that, there was no relationship between experimental group students' attitudes to integrated science and their achievement in integrated science. Fuller and Clarke (1994) are of the view that there are other factors such as class size, teachers' experience and qualifications, availability of instructional materials, class attendance, method of teaching and students' learning styles, etc. that influence students' achievement. By implications therefore, attitude of students towards a subject alone cannot predict their achievement.

Conclusion
The study revealed that students who were exposed to the integration of indigenous industrial activities in the teaching and learning science developed a higher positive attitude towards integrated science (Table 1). The outcome of the study also indicated no statistically significant relationship between achievement and attitude of students exposed to the integration of indigenous industrial activities in the teaching and learning of concepts on the topic matter (Table 3).
There was this revelation during the interview session that, in most circumstances, science concepts are taught using lecture, discussion, and illustration methods. This consequently lowers learners' conceptual understanding of science as they study by means of memorisation or rote learning. Several of the interviewees were of the opinion that they would prefer the use of a teaching approach or strategy that links science learned at school to the indigenous (local) activities within the society. They also indicated that the indigenous activities connected their prior knowledge from home to the school, hence making the learning of science concepts interesting, fun and easy to understand. This further created good learning environment, full of activities, better class participation by students and develop in learners highly positive attitude towards the teaching and learning of science through the use of integration of indigenous industrial activities.

Recommendations
Based on the findings of this study, the following recommendations were made: Teachers should take cognizance of the fact that students' prior knowledge which they activate to begin a new lesson does not only comprise of the science concepts that have been taught previously but also includes the diverse indigenous knowledge the students learn from the society. Teachers should try as much as possible to link science concepts they teach at school to the day to day activities students engage in at home and also the indigenous industrial activities within the society so as to make science relevant to the students. When this is done, it is hoped that it will whip-up students' interest in science, thus bring about improvement in students' achievement and attitude in science and would also encourage them to study it to the higher levels.
Science teachers should invite indigenous craftsmen, artisans etc. from the indigenous community as resource persons into the school to educate students on the processes and principles applied in some of these indigenous industrial activities in their community. This would whip up students' interest and help them to develop positive attitude towards science.
Students should be encouraged to explore their immediate indigenous environment in order to relate the science concepts they learn in the classroom to the activities they engage in the environment. This could be enhanced by giving students science projects that are related to their indigenous environment.
Teachers should be encouraged to improvise from the indigenous environment in the absence of the real TLM. This can be done by providing teachers hand books which should provide guidelines to that effect.