Mechanical Properties of Polyvinyl-Acetate and Toluene Diisocyanate and Sulfonated Phenol-Formaldehyde Foam Composites
Abstract
Blend of polyvinyl acetate (PVA) and Toluene diisocyanate (TDI) were mixed with different percentages by weight of sulfonated phenol-formaldehyde (SPF) foam of prepared sulfonated phenol-formaldehyde resin. The measured mechanical properties such as the tensile modulus (Et) values are (107, 43.7, 84.7, 424 and 165) MPa, for samples (1, 6, 7, 8 and 9). Tensile strength (?M) before break are (0.923, 1.21, 5.56, 6.43 and 8.65) MPa, maximum force applied on the specimen number (9) is 355 N. More information of the article can be found in the full paper.
To list your conference here. Please contact the administrator of this platform.
Paper submission email: JNSR@iiste.org
ISSN (Paper)2224-3186 ISSN (Online)2225-0921
Please add our address "contact@iiste.org" into your email contact list.
This journal follows ISO 9001 management standard and licensed under a Creative Commons Attribution 3.0 License.
Copyright © www.iiste.org