The Behavior of Variable Zone for Concave Arcs -Fin of Heat Sink with Multi Air Jet Impingement

Abstract

Novel array arcs- fin heat sink 7×2 with 6×2 multi air jet impingement are presented in this paper by using numerical simulation. Temperature distribution of jets diameter of 5mm and arcs- fin heat sink with variety shapes at constant radius of 45mm are evaluated. Reynolds number ranges from 7000 – 11000. The study has been done at constant Z/d= 6 and constant heat flux =8333.33 W/m². The best shapes of fins has an effective role in improving the rate of heat transfer .In this paper, the design concerned in arcs ships to construct fin geometry. Four concave arcs constricted the shape of fins heat sink for model A. This model has been changed to construct models (B-C-D-E) by reflect two concave arc from it to be convex arc. All five models at the same radius. The five configurations were comparative between each other and the best model comparative with flat plate heat sink. It is observed that model D of heat sink showed best temperature dissipation than the others.

The results of this paper can help to select heat sink that meets a design's thermal, Power, packaging and cost requirements (specialized in arcs fins) with array of impingement jet, which is a popular used in cooling electronic devices.

Keywords: arcs –fin heat sink; array of impingement jet; CFD.

DOI: 10.7176/CMR/13-2-02

Publication date:May 31^st 2021