Thermal Evaluation of a Parabolic Trough Solar Concentrator Using Three Different Receivers

Abstract

Energy demand, global warming from the fossil fuels and attempt to reduce greenhouse gas emission have placed the centre of attention on how to utilize an alternative sources of energy such as renewable energy technology This work presents the design, fabrication, and evaluation of the performance of Parabolic Trough Solar Concentrator (PTSC) as a source of heat energy. The PTSC is built, having the Supporting stand made of mild steel and reflector is made of the segmented mirror having a reflectivity of 0.85, a rim angle of 90^o and aperture area of 2.5 m² and with a concentration ratio of 11.7. The receiver pipes are made of three different materials; copper, aluminum, and stainless steel. The effects of shifts in focal lengths on the performance of the PTSC with three different receivers were investigated. The results reveal copper as a receiver tube conducts heat to the heat transfer fluid better than aluminum and stainless steel receivers. The focal length of 30 cm gave the best results compared to other values of 27 and 35 cm with a maximum temperature of 114.4 ^oC. The experimental results revealed that useful heat gained, overall heat loss coefficient, collector efficiency factor, heat removal factor, collector and thermal efficiency were 147.8 J, 5.04 W/m²K, 0.05, 15.05, 0.032% and 15.5% respectively. The study shows that the Parabolic Trough Solar Concentrator as a source of heat energy gives a promising performance. This concentrator will reduce the dependence on the electric power supply, and it controls pollution emanating from fossil fuel, thereby reducing environmental problems.

Keywords: Parabolic Trough Solar Collector, Segmented Mirror, Efficiency, Receivers.

DOI: 10.7176/JETP/9-5-03

Publication date:June 30^th 2019