Comparative Cost Analysis Between Hydraform Interlocking Brick and Sandcrete Block as Walling Materials for Low-Cost Housing Development in Nigeria

Abstract

This study analyzed the cost of production and construction of 225mm hollow sandcrete blocks and hydraform interlocking bricks and walls to compare the findings of the results. The study was conducted in Auchi, Estako West Local Government Area of Edo State, Nigeria. The study compared the construction of two models of 225mm hollow sandcrete blocks and hydraform interlocking bricks, materials employed for wall construction for the study are; clay, cement, sand, water and mould. The result of the study indicates that unit cost of 225mm hollow sandcrete block and hydraform interlocking bricks are ₦168.57 and ₦57.85 respectively. While the cost per square metre of 225mm hollow sandcrete block wall and hydraform interlocking brick wall are ₦3,199.40 and ₦3,079.52 respectively. The study also revealed that it is more costly to apply finishes to sandcrete block wall when compared with hydraform interlocking brick wall. Sandcrete block wall requires rendering or plastering to both faces of the walls, while hyraform interlocking wall requires rendering of not more than 300mm girth to vertical external corners of the brick wall. The study, therefore, recommends the use of hydraform interlocking bricks for low-cost housing to reduce the housing deficit in Nigeria.

Keywords: Sandcrete block; hydraform interlocking brick; walling; cost analysis; Auchi;

DOI: 10.7176/JNSR/11-22-07

Publication date: November 30^th 2020