Implementation of Improved Method on Embedded Surveillance System with Reduced Power Usage
Abstract
In this project design and implement a home embedded surveillance system with ultra-low alert power. Traditional surveillance systems suffer from an unnecessary waste of power and the shortcomings of memory conditions in the absence of invasion. In this design we pressure sensors as the alert group in windows and doors where an intruder must pass through. These low-power alert sensors wake up the MCU (Micro Controller Unit) which has power management for the ultrasonic sensors and PIR sensors indoors. This state transition method saves a large number of sensors required for the alert power. We also use the Majority Voting Mechanism (MVM) to manage the sensor groups to enhance the probability of multiple sensors sensing. After the MCU sends the sensor signals to the embedded system, the program starts the Web camera. Our sensing experiment shows that we reduce the system’s power consumption
Keywords: Embedded Surveillance System, PIR Sensor, Ultrasonic Sensor, Low-PowerState
![Download the IISTE publication guideline!](https://www.iiste.org/sub/iiste_footer_journal.jpg)
To list your conference here. Please contact the administrator of this platform.
Paper submission email: CEIS@iiste.org
ISSN (Paper)2222-1727 ISSN (Online)2222-2863
Please add our address "contact@iiste.org" into your email contact list.
This journal follows ISO 9001 management standard and licensed under a Creative Commons Attribution 3.0 License.
Copyright © www.iiste.org