Fluid Loss and Filtration Properties of a Citrus Sinensis Pectin Extract-based Drilling Mud
Abstract
The production of drilling mud using pectin extracted from Citrus Sinensis peels was carried out. The extraction was carried out using water-hot acid technique which is a conventional method, and the extracted pectin was pre-gelatinized using calcium water. The pre-gelatinized pectin biopolymer was used to prepare drilling mud. Filter loss method was used to determine the filtration properties of the mud at 25°C and 200°C and 0.1g/mol concentration of pectin polymer was compared to the filtration behavior of hydroxyl propyl starch modified drilling mud. Our results showed that the pectin biopolymer mud (PPM) has better filtration control behavior than the hydroxyl propyl starch modified drilling mud (CMM). The study also showed that highest sorptivity value of 21.25 was obtained with PPM at 200°C, while the highest diffusivity value of 0.424 was obtained with CMM at 200°C.
Keywords: Pectin, Citrus, Biopolymer, Sorptivity, Diffusivity, Drilling mud, Filtration
DOI: 10.7176/CMR/12-3-03
Publication date:March 31st 2020
![Download the IISTE publication guideline!](https://www.iiste.org/sub/iiste_footer_journal.jpg)
To list your conference here. Please contact the administrator of this platform.
Paper submission email: CMR@iiste.org
ISSN (Paper)2224-3224 ISSN (Online)2225-0956
Please add our address "contact@iiste.org" into your email contact list.
This journal follows ISO 9001 management standard and licensed under a Creative Commons Attribution 3.0 License.
Copyright © www.iiste.org