Study of Hybrid Photovoltaic Thermal (PV/T) Solar System with Modification of Thin Metallic Sheet in the Air Channel.

Abstract

The increase of the temperature of PV module gradually decreases the electricity production. To eliminate this problem thermal collector is incorporated with the PV module to allow PV cooling. It has been found that PV cooling increases the electricity production and allows the extra heat to be absorbed by the coolant extracting thermal output. This system is called hybrid PV/T system where water and air can be used as the heat extraction medium. Use of Thin Flat Metallic Sheet (TFMS) in the air channel in PV/T system increase the temperature of the air considerably which has found in several experiments. The comparative performance of PV/T system using four types of shape for thin metallic sheet including flat sheet was investigated. The performance was investigated at Islamic University of Technology in Bangladesh by using an experimental hybrid PV/T system at outdoor .The experiment shows that efficiency of the PV/T system varies significantly with the variation of the shape of the metallic sheet in the air channel. The used shape was flat, saw tooth backward, saw tooth forward and trapezoidal. By the experimental results it is found that the efficiency of the flat metallic sheet is the lowest among the four. Saw tooth backward and saw tooth forward shows the same efficiency and trapezoidal metallic sheet is lower than that.