Static Loading with Axial Channel for Hydrodynamic Journal Bearing Calculation Method

Hakan Adatepe


In this study, the calculation method required to transport the load in axial channel lubricated hydrodynamic journal bearings is the yield. Distortion analyzes of existing (designed) bearings can also be carried out with the method presented here, the performance of the bearing can be investigated and used to investigate what can be done to improve the performance of the bearing. The method presented here can be used for two axial grooved bearings to the right and left of the load direction. Alternative oil distribution patterns can also be negotiated. The journal bearing is statically loaded. But in applications where loads and speed change are slow, the calculation method can be used here. This study mainly consists of two parts. In the first part, the operation of a hydrodynamic journal bearing is defined and a method is given for estimating the required dimensions of the bearing and detailed information is given for bearing design parameters. In the second part, a method for the analysis of a journal bearing is given and necessary information is given for the safe operation of the bearing.

Keywords: Axial Channel, Hydrodynamic Journal Bearing, calculation method

DOI: 10.7176/JIEA/9-3-05

Publication date:May 31st 2019

Full Text: PDF
Download the IISTE publication guideline!

To list your conference here. Please contact the administrator of this platform.

Paper submission email:
ISSN (Paper)2224-5782 ISSN (Online)2225-0506
Please add our address "" into your email contact list.
This journal follows ISO 9001 management standard and licensed under a Creative Commons Attribution 3.0 License.
Copyright ©